Atomized spherical magnesium alloy powder
Developed for the powder consumables of 3D laser printing. The spherical magnesium alloy powder is the low-oxygen, low-nitrogen and spherical powder produced under the protection of inert gas.
1. Chemical component
Magnesium alloy powder AZ91D
Density of magnesium alloy AZ91D is less than 2g/cm3, it is the lightest metal structure material currently, its specific strength is higher than aluminium alloy and steel, easy to process and low processing cost, corrosion resistance is greatly stronger than the low carbon steel, and it has exceeded die-casting aluminum A380, its vibration-damping behavior and magnetic shielding property are more superior than aluminum alloy. Chemical components are as follows:
Component | Mg | Al | Cu | Fe | Mn | Ni | Si | Zn | Be |
Ratio% | 90.43 | 8.90 | 0.0006 | 0. 0112 | 0.19 | 0.0030 | 0.0030 | 0.4278 | 0.00098 |
Magnesium alloy powder ZK61
Magnesium alloy ZK61 is namely the magnesium-zinc-zirconium alloy, and its chemical components are as follows:
Magnesium alloy ZK61 is namely the magnesium-zinc-zirconium alloy, and its chemical components are as follows: | Mn | Zr | Zn | Fe | Mn | Ni | Si | Cu | Al |
Ratio% | 94.46 | 0.33 | 5.1953 | 0.0035 | 0.0055 | 0.0030 | 0.0007 | 0.0010 | 0.0006 |
2. Specification
The granularity of the atomized spherical magnesium alloy powder is within 20-1000 mesh, and it can be produced according to customer’s demands.
3. Performance of magnesium alloy powder
(1) Inert gas shielding process is taken, O, N and other impurity content is low, and impurity is high;
(2) Rapid cooling process is taken, magnesium alloy powder has fine grain;
(3) Atomization technique is taken, magnesium alloy powder is spherical and liquidity is good.
4. Application area
The atomized spherical magnesium alloy powder produced by our company can be widely used in 3D laser printing additive manufacturing consumables, novel electronic packaging material and other field, and also can be used in aerospace, automobile parts and 3C product.